| Description |
Technical
Data |
|
Price
+ Shipping |
| LM-1 Basic Kit |
Includes:
LM1, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor
Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection,
Bung/Plug Kit, Software CD, and Quick Start Guide. |
|
$349.00 |
| LC-1:
Lambda Cable + 02 Sensor (Standalone Wideband Controller) |
*Bosch
Wideband Sensor Included*
The LC-1 is a complete wideband controller built in to a sealed cable. It
features the same award-winning patented digital measurement principal
found in the LM-1, and includes digital input, output, and 2 programmable
analog outputs. |
|
$199.00 |
| LM-1 RPM
Kit - (LM-1 + LMA-2 RPM Converter Aux. In Cable) |
Includes:
LM1, RPM Converter (Aux Input #2), Bosch 5-wire Wideband 02 Sensor, Analog
Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial
Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start
Guide. |
|
$429.00 |
| LMA-2:
RPM Converter |
Includes
an integrated circuit for converting a tach or inductive clamp output to a
clean analog signal that can be logged by the LM-1. The cable can be
calibrated to the characteristics of your engine through a simple setup
routine. **Inductive Clamp Not Included** |
|
$99.00 |
| Inductive
Clamp (For use only with LMA-2 & LMA-3) |
For
use only with the RPM Converter (LMA-2), AuxBox (LMA-3), or the DL-32
(6ft.) |
|
$20.00 |
| Exhaust
Clamp |
Patent-pending,
Venturi-effect, tapped exhaust clamp for obtaining accurate lambda
measurements in non-cat autos or other engines. |
|
$75.00 |
| HBX-1
(Heat-Sink Bung Extender) |
|
|
$89.00 |
| Analog
Output Cable |
|
|
$8.00 |
| Analog
Display |
|
|
$79.00 |
| AC
Adapter |
|
|
$35.00 |
| USB-to-Serial
Adapter |
Adapter
for computers without Serial ports. This cable will convert Serial to USB.
Hardware drivers included. |
|
$29.00 |
| Power
Cable (12V battery clips) |
|
|
$12.00 |
| Bung/Plug
Kit (Steel) |
|
|
$8.00 |
| Stainless
Steel Bung/Plug Kit |
|
|
$8.00 |
| Sensor
(Bosch LSU 4.2) |
Bosch
LSU4.2 5-wire, wide-band O2 sensor. Replacement sensor for LC-1, LM-1, and
LC-1ST.
|
|
$79.00 |
| Sensor
Cable (10-ft) |
|
|
$20.00 |
| 18-ft.
Sensor Cable |
|
|
$49.00 |
| Power
Cable (Cigarette Lighter) |
|
|
$12.00 |
| Serial
Cable |
|
|
$12.00 |
| LMA-3:
AuxBox (Multi-sensor Device) |
The
AuxBox attaches to the auxiliary input of the LM-1 and allows a user to
log and analyze 5 critical engine metrics in addition to the air/fuel
ratio native on the LM-1. The AuxBox makes the LM-1 into a complete tuning
kit, allowing the user to capture, view, and analyze data on all 6
channels that the LM-1 can log internally. Correlating AFR, RPM, MAP, and
CHT, for example, is essential when tuning piggy-back fuel controllers,
ECU programmers, aftermarket ECUs, or racing carburetors.
The 5 internal sensors are intended for capturing Manifold Air Pressure
(MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature
(EGT), RPM conversion (from a tach signal or inductive clamp),
Acceleration, and Injector Duty Cycle (or Dwell). The internal MAP sensor
is a 3-bar absolute pressure sensor, providing accurate data up to 44.1
PSIA. The temperature measurement circuit features a K-type thermocouple.
The internal accelerometer features 2 axis measurements for a variety of
mounting options.
|
|
$249.00 |
| LC-1:
Lambda Cable (Standalone Wideband Controller) |
*Sensor
NOT included*
The LC-1 is a complete wideband controller built in to a sealed cable. It
features the same award-winning patented digital measurement principal
found in the LM-1, and includes digital input, output, and 2 programmable
analog outputs. |
|
$149.00 |
| Autronic
ECU Interface Cable |
|
|
$59.00 |
| Program
Cable: LC-1, XD-1, Aux Box to PC |
|
|
$12.00 |
| 6-ft.
Thermocouple Wire (LMA-3) |
|
|
$8.00 |
| Cable
LM-1 to LMA-3 |
|
|
$12.00 |
| LMA-3
Accessory Kit (AuxBox) |
|
|
$15.00 |
| Plug
Programming Terminator |
|
|
$8.00 |
| Window
Mount |
|
|
$75.00 |
| MTS
Carrying Case |
|
|
$55.00 |
| LM-1
AuxBox Kit (LM-1 + LMA-3) |
Includes:
LM1, AuxBox (LMA-3) Input Accessory, Bosch 5-wire Wideband 02 Sensor,
Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft.
Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick
Start Guide. |
|
$589.00 |
| Cable
LM-1 to XD-1 |
|
|
$12.00 |
| Cable
Daisy Chain XD-1 or LC-1 |
|
|
$12.00 |
| Extended
Bung/Plug Kit (less restriction for small dia pipes/Steel) |
|
|
$12.00 |
| ST-12
SuperTune-12 Engine Data Acquisition System |
The
Innovate Motorsports’ SuperTune-12 is a complete data acquisition system
for advanced engine tuning. The system is anchored by Innovate’s
award-winning digital wideband Air/Fuel Ratio technology, but also
includes flexible sensors for RPM, MAP, Temperature, Duty Cycle, and
analog inputs. The ST-12 can power, manage, and consolidate data from up
to 12 specialized LC-1 wideband oxygen-sensor controller cables. The
specialized cables are functionally identical to the standard LC-1 cables,
except they are 18 ft. long, terminated with a single secure connector,
and sleeved in a rugged insulator.
The ST-12 is designed for engine builders, tuners, and racers. At its
simplest, the ST-12 can add wideband Air/Fuel measurement to existing
dynos, allowing users to either feed the ST-12’s outputs into their dyno,
or to feed the dyno’s outputs into the ST-12. |
|
$1,995.00 |
| LC-1ST
18Ft Heavy Duty Lambda Cable for ST-12 With O2 Sensor |
**ONLY
FOR USE WITH ST-12 SYSTEM**
ST-12 supports up to (12) LC1-ST wideband controllers.
The specialized cables are functionally identical to the standard LC-1
cables, except they are 18 ft. long, terminated with a single secure
connector, and sleeved in a rugged insulator. Includes Bosch 5-wire
sensor. |
|
$299.00 |
| XD-16:
(16 in 1 gauge only) |
GAUGE
ONLY - Accessory for LM-1, LC-1, LMA-3, or DL-32.
The Innovate XD-16 dash-mountable Digital Display ships as an AFR guage,
but can also be configured to display any channel of the Modular Tuning
System. Key features:
-2 Bezels + 8 faces = 16 combinations (see below)
-3/4” thick, so it's possible to mount even in surface mount
configurations
-3-character LED display
-Record/Calibrate/Peak Hold button
-Programmable (values and colors) digital needle
-Billet Aluminum bezel
The kit also includes:
-XD-16 to LM-1 Serial Cable
-Male 2.5 to 2.5 to connect to LC-1, AuxBox, LM-1, ST-12, or DL-32
-Terminator Plug
-Mounting Hardware Kit |
|
$229.00 |
| XD-16
Standalone Gauge Kit: (16 in 1 gauge W/ LC-1 & O2 Sensor) |
|
|
$399.00 |
| DL-32
(32 Channel Vehicle-Mounted Data-Logging System) |
The
DL-32 is a complete vehicle-mounted data-logging system for advanced
engine tuning. The system is anchored by Innovate's award-winning digital
wideband air/fuel ratio technology, but also includes flexible sensors for
RPM, MAP, temperature, duty cycle, and analog inputs.
The DL-32 kit includes the DL-32, mounting hardware, SD memory card, cd
which includes software and manuals, quick start guide, MTS 2.5mm to 2.5mm
male cable, and a push button and LED. |
|
$499.00 |
| SSI-4 (4
Channel Simple Sensor Interface) |
The
SSI-4 is also a key component of Innovate Motorsports' Modular Tuning
System (MTS). Using the SSI-4's serial ports you can daisy-chain other
Innovate devices such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and TC-4. |
|
$129.00 |
| TC-4 (4
Channel Thermocouple Amplifier) |
The
TC-4 ($129.99) includes the TC-4, Program Cable, Patch Cable (to daisy
chain with other MTS compatible devices), Mounting hardware, and cd which
includes software and manuals. |
|
$129.00 |
| DB-Gauge
Blue (Gauge Only) NEW! |
**Gauge
Only**
This gauge can be purchased as an accessory to be used with the LC-1 or
LM-1. These kits includes the DB Gauge, mounting hardware, CD and
quick-start guide. |
|
$99.00 |
| DB-Gauge
Red (Gauge Only) NEW! |
**Gauge
Only**
This gauge can be purchased as an accessory to be used with the LC-1 or
LM-1. These kits includes the DB Gauge, mounting hardware, CD and
quick-start guide. |
|
$99.00 |
| DB-Blue
Kit (Blue LEDs, LC-1 & O2 Sensor) NEW! |
This
kit comes complete with the patented award-winning LC-1 Wideband
Controller, DB-Blue Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit,
Software CD, and quick start guide. |
|
$289.00 |
| DB-Red
Kit (Red LEDs, LC-1 & O2 Sensor) NEW! |
This
kit comes complete with the patented award-winning LC-1 Wideband
Controller, DB-Red Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit,
Software CD, and quick start guide. |
|
$289.00 |
| LC-1
Plus Kit (LC-1 + SSI-4) NEW! |
The
LC1+ kit includes an LC-1 wideband controller with O2 sensor, plus an
SSI-4 multi-sensor interface. Used in conjunction with LogWorks, running
on a laptop or PC, this setup allows you to record and analyze 5 channels
of data. These channels are Air/Fuel Ratio, and any four of the following:
RPM, Injector Pulse Width, Throttle Position, Driveshaft/Wheel Speed, or
Boost/Vacuum. All channels can be configured for external 0-5V or
frequency. |
|
$299.00 |
| XD-16
Plus Kit (XD-16 + LC-1 + SSI-4) NEW! |
|
|
$499.00 |
| LC-1 Duo
Kit (2 LC-1’s + DL-32) NEW! |
The
LC1-Duo Kit consists of 2 LC-1s (one for each bank), and a DL-32. This kit
is ideal for most forms of racing, and offers a savings of nearly $100 vs.
when purchased separately. |
|
$799.00 |
| G2 Kit
(G2 Gauge, LC-1 & O2 Sensor NEW! |
This
kit comes complete with the patented award-winning LC-1 Wideband
Controller, G2 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit,
Software CD, and quick start guide. |
|
$289.00 |
| G3 Kit
(G3 Gauge, LC-1 & O2 Sensor NEW! |
This
kit comes complete with the patented award-winning LC-1 Wideband
Controller, G3 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit,
Software CD, and quick start guide. |
|
$289.00 |
| G2 -
Silver/Silver (Gauge Only) NEW! |
**Gauge
Only**
This gauge can be purchased as an accessory to be used with the LC-1 or
LM-1. These kits includes the G2 Gauge, mounting hardware, CD and
quick-start guide. |
|
$99.00 |
| G3 -
Silver/Black (Gauge Only) NEW! |
**Gauge
Only**
This gauge can be purchased as an accessory to be used with the LC-1 or
LM-1. These kits includes the G3 Gauge, mounting hardware, CD and
quick-start guide. |
|
$99.00 |
| RAD-1,
Rollover Avoidance Device NEW! |
The
RAD-1 (Rollover Avoidance Device) is a precise Digital Inclinometer that
features user-programmable tip points and a loud progressive warning tone
(like a backup warning). The display shown X (Pitch) and Y (Roll) angles,
and it's got a few other cool features, but it's mostly the audio warning
that really makes it useful. Now you can keep your eyes on the rocks,
trail, or road, while keeping an ear out for the RAD-1. |
|
$179.00 |
